很全面，很有用。
上边说的原档的文件可否方便帮忙发danielwang1020@163.com 里。 非常感谢。
lovening00 发表于 2015-3-6 11:14 static/image/common/back.gif
上边说的原档的文件可否方便帮忙发 里。 非常感谢。
不能留邮箱地址。。
Thanks for sharing
楼主，最近刚看了4417.1-2012版本，在新版本中，已经没有Supplier信息的要求，请看下面的内容，是不是表示RCM LOGO使用时不需要增加供应商号码，或证书编号什么的？
The RCM, brand and model identification as specified in 4.2 (b) and (c) shall be durably applied to the equipment by a suitable means such as printing, painting, moulding, etching or engraving. Reproduction shall be legible with normal or corrected to normal vision and shall be at least 3 mm in height (H in Figure 2) for the RCM and at least 1 mm in height for the brand name and model designation or type reference.
wybbk 发表于 2015-5-4 10:29 static/image/common/back.gif
楼主，最近刚看了4417.1-2012版本，在新版本中，已经没有Supplier信息的要求，请看下面的内容，是不是表示R ...
这个新版的确实把这里删掉了，用了 brand 代替，然后在4.2 b c 里面详细解释了。
4.2 Identification of responsible supplier and equipment
(a) Responsible suppliers of equipment marked with the RCM must register their details
on the EESS national database under EESS regulations for the purpose of
identification. The EESS national database is located at www.erac.gov.au.
NOTE Suppliers of equipment currently registered with Standards Australia for the use of the RCM shall register
with the EESS national database before 31 August 2013 if they are supplying products marked with the RCM
beyond that date.
(b) When a responsible supplier uses the RCM on Level 3 equipment or Level 2
equipment as defined in AS/NZS 4417.2 the equipment shall be marked with a brand
name and model designation or type reference and this information shall be registered
by the responsible supplier on the EESS national database where required by
legislation.
(c) When a responsible supplier uses the RCM on Level 1 equipment as defined in
AS/NZS 4417.2, the equipment shall be marked with a brand name and model
designation or type reference.
好东西,学习了
很好的总结，楼主不打算继续了么？
学习长知识了
谢谢分享！非常感谢版主:)
