我估计如果你下次有看到这么个设备，你会买吗？？？ 引用第4楼baocanger于2009-09-03 16:06发表的:
我们的产品都是必须要安装驱动才能使用的，这样一来重要你用这个设备那么就必然会使用CD，这才把这些纸头的东西作进CD里去了，倘若是个电饭锅，那自然是不能刻在CD里了。
搞不到，使用者连你的产品说明书都没有看到，使用者怎么可能直接用你的产品来播放CD看说明书呢。
肯定需要找另外有纸质操作说明书的CD机来播放你的CD里的说明书，才能用你的产品。
一听都很麻烦。。。你得产品设计的到底好使用吗？ 站在顾客的角度上，我当然也是想打开箱子就能看到手册和相关的说明书是最方便的，无奈要cost down，就得从这些纸头上做文章，领导们认为没有法规规定就是可行的，没有实实在在的换位思考。 从目前的信息程度普及率来看，那些领导都是头脑发热，欠周密思考。。。 不好意思，昨天的网络不好。
(Sub) CLAUSE/ANNEX NUMBER:
5.4
(Sub) CLAUSE/ANNEX HEADING:
Instructions
OTHER RELEVANT (Sub) CLAUSES/ANNEXES (as applicable):
None
DESCRIPTION OF ISSUE:
Can the important safety instructions identified in Sub-Clause 5.4 be provided in an electronic format (i.e. CD-ROM, floppy disks, embedded software, firmware, etc.)?
APPLICATION GUIDELINE:
Products may be provided with the important safety instructions, identified in Sub-Clause 5.4, in electronic or "soft" format, including embedded software, firmware, floppy disk, or CD-ROM, provided the following conditions are met:
The product should have the appropriate hardware, either integral to the product or as a required accessory, to both access and view the instructions. For example, if instructions are provided on a CD-ROM, the product should have a CD-ROM drive, and require the use of a monitor for normal operation.
Adequate printed instructions should be provided with the product to allow complete initialization of the product, which includes basic set-up of the system and access to the electronic instructions without the introduction of a hazard.
The printed instructions should include information describing existence of the electronic instructions within the basic system software. Alternatively, during the initialization described in item 2, and without user prompting, the electronic instructions may be displayed automatically.
For systems with the instructions contained in embedded software, if the electronic instructions may be lost due to hardware failure or accidental file deletion by the user, the printed instructions should specify the need for the user to back-up the system software (within which the electronic instructions reside) according to procedures normally recommended by the manufacturer.
Compliance with these guidelines will be determined through a review of the system's initialization procedure and any printed instructions supplied with the equipment. Other options that provide an equivalent level of safety may be considered based on the application.
The important safety instructions shall precede any operating instructions.
RATIONALE:
In accordance with Sub-Clause 5.4 products are required to be provided with important safety instructions to avoid the introduction of hazards. These instructions traditionally have been provided in a printed manual (paper format) with each individual product.
In order to provide ready access to the important safety instructions and reduce the costs associated with supplying paper-based instructions, manufacturers would like the option of being able to include the important safety instructions as a part of the software packaged with the product. When provided in an electronic format, the important safety instructions will be available for the user's individual reference as part of the equipment's base system software, or will be provided in separate storage media, such as a floppy disk or CD-ROM.
To allow the product to be initialized safely and allow the user to access the electronic instructions, a minimum amount of printed instructions generally are necessary. Also, to ensure continued availability of the important safety instructions in case of hardware failure or accidental software deletion, a software back-up procedure needs to be specified by the equipment manufacture. 14楼说的是出自哪个文件？ 基本上纸质说明书是一个通用的要求，不过我也不知道那个文件有这个要求。
还有另外一个问题，好像将说明书装在CD里，要是出口的话会很麻烦，因为涉及到信息安全问题，海关会这样的东西管得很严。所以不建议用CD的说明书。 ULPAG(60065) 原来如此 没有CD-ROM怎么办
页:
1
[2]
