fszsx 发表于 2007-9-28 20:42

GS认证 电暖器铭牌

我公司在做一款挂墙式电暖器，认证公司对样品提出如下改进：
铭牌请放在安装后能看到的位置
但我查了GB4706.23没有看到相关内容；认证公司提供的标准如下
7.14 The markings required by the standard shall be clearly legible and durable.
Compliance is checked by inspection and by rubbing the marking by hand for 15 s with a
piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with
petroleum spirit.

7.15 The marking concerning covering shall be visible after the heater has been installed. It shall
not be placed on the back of portable heaters.
The marking concerning removable fireguards shall be visible before fitting the fireguard.

有那位高人可否指点指点！

hli168 发表于 2007-9-28 21:21

你公司的商标能看到吗?

fszsx 发表于 2007-9-29 09:08

看不到

嘻嘻 发表于 2007-10-9 11:23

那就不可以了.
你看的是国标,而现在贵司产品申请的GS 标志,则需要用EN标准.所以得按认证公司的建议来.

huhaijun 发表于 2007-10-9 11:44

铭牌放在安装后能看到的位置！

xiaogao22 发表于 2015-9-12 10:59

the label should be showed on the outside surface..

30101704 发表于 2015-9-14 09:28

页: [1]
查看完整版本: GS认证 电暖器铭牌