shaozqi 发表于 2010-9-26 11:02

接地标志

电机的接地标志可否用不干胶。

琥珀流云 发表于 2010-9-26 11:12

These symbols shall not be located on screws, or other parts that might be removed when
conductors are being connected.
只要不容易掉 应该是可以的

luqing_sz 发表于 2010-9-26 11:25

引用第0楼shaozqi于2010-09-26 11:02发表的 接地标志 :
电机的接地标志可否用不干胶。
按标准意义,电机接地处不需要接地标识.

上将军 发表于 2010-9-26 13:02

只要有标识,能识别就可以了

Andy.Yang 发表于 2010-9-26 13:18

Normally, marking is for traceability, warning and reminding, so if it's used, make sure that why you wanna use it, of course, if all the markings shouldnot be removed so easily...
页: [1]
查看完整版本: 接地标志