安规mark 铭板标贴要求--2 ，澳洲 塞尔维亚，乌克兰，俄罗斯等等
本帖最后由 demon_life 于 2015-7-22 13:37 编辑很久之前发过一个关于产品铭牌上安规logo 的帖子，看见很多人都在关注这个而且要求补充，呵呵，刚好趁着现在不忙，我继续把我搜集研究的贡献给大家。
先来澳洲的RCM ：
澳洲标准AS-NZS 4417.1-2009--General rules for use of the mark 是专门针对 RCM label要求的。
现在最新的是AS NZS 4417.1-2012了，这个里面已经不要求加上证书号和当地代理商信息了，只有RCM 就可以了。
该文件中解释了RCM 的意义，误用需要承担的责任，制作方式，颜色，尺寸等等。
制作RCM 的方式：
The RCM and supplier identification shall be durably applied by any suitable means such as Printing，painting，moulding， etching and engraving reproduction. Reproduction shall be legiblewith normal or corrected to normal vision and no smaller than 3mm in height for the RCM and 1mm in height for supplier identification, for the life of the product, and small conform to the specification given in Clause 3.3. The RCM maybe reproduced in any colour.
RMC 的颜色：The RCM maybe reproduced in any colour
特别要注意：
该要求规定的RCM的尺寸，不得小于3mm，同时进口商代码NXXX 等高度不得小于1mm
我手上有原始AI 格式RCM 原档，网站上传不了，呃，有需要的站内联系我吧
本帖最后由 demon_life 于 2014-4-23 13:01 编辑
Serbia 塞尔维亚:
塞尔维亚官方发布通知 2012年1月1号后 出口到该国的电气产品几乎都需要COC声明，COC 包含 EMC 和LVD 两部分的要求，跟CE 差不多。
安全用CB 去转，EMC 用CE 报告即可。
具体mark 要求可以参加"Regulation on the manner of placing certificaton marks on products and use of certification marks"
("Official Gazette of RS" no. 25/2010), with the Serbian mark of conformity.
Serbian mark of conformity contains three letters A that make equilateral triange (3A) and looks as
it follows:
Conformity mark must be at least 5 mm high.
Bellow the mark is unique number of notified body "Kvalitet" (И005). The two digits on the right
bellow the mark are last two digits of the year when the document of conformity is issued for that
product.
该logo 下方是年份，这个数字每年发生变化。证书是那年发的就需要对应的年份，今年的就会14拉
官方文件还要求：
此mark 要清晰可见，不能张贴于能被轻易移除的部件上面。
The manufacturer or its representative, or importer if the manufacturer or its representative is not
registered in the Republic of Serbia, puts Serbian mark of conformity on the product in a visible
place so that mark must be legible and indelible and clearly visible, preferably on the same label
with the other data. The mark should not be placed on the parts that are removed when repairing or
servicing of products.
塞尔维亚还有一种是针对 认证模式的mark ，这个可能有朋友也需要。
我手上原始格式的mark，有cdr，AI, QPS的，呃，花了我老久在官网上面找到的。但是上传不了这种格式的文件，有需要的站内联系我吧。
占板凳。。。。。。。 本帖最后由 demon_life 于 2014-4-24 12:10 编辑
日本 VCCI
The Regular Member shall put the following statement or mark on a Class A ITE or Class B ITE. For equipment with information display device “electronic way of display” can be employed for the following marking
1. CLASS A ITE：
A Class A ITE shall have the following warning statement in a conspicuous location on each product. If direct marking on the product is difficult, a tag for warning can be used
Translation:
This is a Class A product.
In a domestic environment this product may cause radio interference, in which case the user
may be required to take corrective actions.
Note 1: The characters shall not be less than 2 mm high. If adequate space is unavailable,
the character size may be reduced as long as the characters are readable.
Note 2: VCCI-A means that the equipment satisfies the limits of interference for Class A ITE.
2. Class B ITE:
A Class B ITE shall have the following mark in a conspicuous location on each product:
3. Equipment registered based on the confirmation measurement at the user installation site
A Regular Member shall put the following statement in a conspicuous location on the
product that was registered based on the confirmation measurements performed at the user
installation site:
Translation:
This is a product for which interference was measured and confirmed to comply at the
present installation site. When this equipment is used at any other location, interference
must be measured at the new location for compliance.
4. Optional device
For optional device A, the required mark and the statement for Class A ITE or Class B ITE
whichever applicable shall be affixed, according to the classification of the optional device
(refer to clauses 1, 2, or 3 of this article). If marking on the product is difficult, the mark
and the statement may be omitted. The mark and the message are not required for optional
device B.
Article 11 (Information in Instruction Manuals) ，对说明书也有要求如下：
For ITE, a Regular Member shall supply the following warning statement in instruction manuals
or equivalents : For Class B ITE, however, its omission is permissible.
For ITE that is registered based on the result of the confirmation measurements at the user's installation site, the Regular Member shall add the warning statement shown in clause 3 in the instruction manual to the user
a. Class A ITE
Translation:
This is a Class A product based on the standard of the VCCI Council. If this equipment is
used in a domestic environment, radio interference may occur, in which case, the user may
be required to take corrective actions
b. Class B ITE
Translation:
This is a Class B product based on the standard of the VCCI Council. If this is used
near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
c.Equipment registered based on the confirmation measurement at the user installation site
Translation:
This is a product for which interference was measured at the present installation site and
confirmed to comply with the standard of Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). Before using the equipment at any
location other than the present installation site, the member shall measure interference for
confirmation and register the result to VCCI.
4.Optional device
For optional device A, the appropriate statement or mark shall be marked as required for
Class A ITE or Class B ITE, according to the classification of the optional device class.
For optional device B, such information is omitted.
占位置。。。。。。。。。。。。。 占位置先。。。。。。。。。。。。。。。。。。。。。。 占位置先。。。。。。。。。。。。。。。 本帖最后由 demon_life 于 2014-4-23 13:07 编辑
UL mark 大全：
不知道有没有人注意到UL 官网上面有所有原格式的UL mark
大家可以自己去下载。
路径如下：
http://www.ul.com/global/eng/pag ... l/ulmarks/mark/art/ 楼主好人啊。 希望多点关于标签的知识， 好方便学习！:D 本帖最后由 demon_life 于 2014-4-23 13:16 编辑
乌克兰 Ukraine
乌克兰目前我见到有两种，一种是整个圈圈的，一种4/3圈的，俄罗斯的网站都是俄文，目前我还没有找到英文版本的，但是我有跟认证代理咨询过两种都可用，但是我建议还是用4/3圈的mark 为好。
乌克兰 尺寸最小 H=0.5mm
