绳索厚度

tassx · 发表于 2009-10-12 15:23

如图是日本的绳索厚度要求，只针对供小孩拉的玩具上的绳索的，比较专业,EN71的是否学习一下？

hewei · 发表于 2009-10-12 15:34

不能!
日本的要求如下;
4.2.2.4 用於18 個以下兒童用的玩具中的繩和彈性繩(參考7.11.12)
含有附件的繩子在承受25±2N 的拉力後長度不可過300mm.
可形成圈的繩在承受25±2N 的拉力後其周長不可超過350mm.
定於搖籃、吊床的繩子,在用25 ±2N 的拉力拉伸時,不超過 750 mm 長度, 此條
件下之長度應不超過其自*由長度的40 %.
繩子的厚度或直徑應該大於或等於1.5mm.
4.2.2.5 兒童拖拉玩具.
兒童拖拉玩具上的繩不可有滑動的結或形成滑動結的扣.並且用於3 歲以下兒童
的拖拉繩的厚度不小於1.5mm.

hewei · 发表于 2009-10-12 15:36

there are difference for ST and EN

pls kindly eggwalk!

书山有路勤为径 · 发表于 2009-10-12 15:44

引用第1楼hewei于2009-10-12 15:34发表的 :
# H* ?7 I$ Z+ P; X( M不能!) P: n+ h- y" U" @1 L Y
日本的要求如下;
+ e; Q9 X/ Y3 y4.2.2.4 用於18 個以下兒童用的玩具中的繩和彈性繩(參考7.11.12)
- O; ^/ v0 k, r; G. N含有附件的繩子在承受25±2N 的拉力後長度不可過300mm.8 [. U/ a' Z! h$ Q
可形成圈的繩在承受25±2N 的拉力後其周長不可超過350mm.
* {% w6 t, M$ Y6 j( R7 h.......

EN71的相关要求是怎样的呢？

hewei · 发表于 2009-10-12 15:55

as below for EN request

5.4 Cords on toys (see A.29)
Cords shall conform to the following requirements:
a) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20
(cord thickness). This does not apply to ribbons.
BS EN 71-1:2005+A8:2009
Licensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)
b) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall
either:
not exceed 220 mm when stretched by a force of (25 ± 2) N; or
when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated
without altering the characteristics of the joints (see Figure 10).
The free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall
be measured as a part of the entire cord (see Figure 11).
c) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.
d) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.
e) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when
stretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length.

tassx · 发表于 2009-10-12 16:06

我是说“粗度”，

hewei · 发表于 2009-10-12 16:08

引用第5楼tassx于2009-10-12 16:06发表的 :* e. o4 ~6 ]0 @1 P y; R
我是说“粗度”，

绳子有厚度的叫法，
没听说过粗度
如果是这样那就PASS

tassx · 发表于 2009-10-12 16:49

引用第6楼hewei于2009-10-12 16:08发表的  :. _; a9 ]/ ? P" ^6 E
绳子有厚度的叫法，
) t8 @1 V) r* H7 X* x" G7 N没听说过粗度
l2 j4 c0 z& v如果是这样那就PASS

不好意思啊，我看错了.　by the way,你的st2002中文打印版是哪里弄来的啊?市面上看不到非扫描版…

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘		万年历 \| 距春节还有		签到充值在线打卡		自2007年5月10日，安规网已运行天
	证书查询 \| 规范下载 \| 资质查询				红包邮箱打卡工资		证书查询 \| 规范下载 \| 资质查询

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[玩具标准] 绳索厚度

本帖子中包含更多资源

安规网为您推荐 /2