|
|
) x- G4 a8 {% @. W+ X5 x0 {' b《UL1472 solid-state dimming control》的5.10的limited short-circuit test短路测试- A6 k, A. E* C. V+ `0 h# S) ^ v
5.10.1 six samples of a dimmer in the as-receiced condition are to be tested in series with a 30-ampere nonrenewable,non-time delay,cartridge fuse rated for branch circuit overcurrent protection on an alternating-current circuit of rated voltage capable of delivering 1000 amperes peak when the system is short-circuited at the testing terminals。后面省略( D! E! B+ Y+ T( d$ _/ ^
, o# K' a' D% q# |- R, A. ]8 h5.10.2 each sample is to be installed in a metal flush-device box mounted in the fixture illustrated in figure 3,and covered with a metal flush-device cover plate,unless a noninterchangeable cover is provided with the dimmer.the enclosure and any otherexposed dead metal are to be connected to ground through a 15-ampere nonrenewable,non-time delay,cartridge fuse rated for branch circuit overcurrent protection. 后面省略; Q2 O. N5 i, u
请教这个短路测试该怎么理解，怪我英语不好理解起来真困难。
* G1 V1 @: }/ }我这样理解不知道对不对：
/ S& x, e) [# V: }" \（1）先把调光器串联一个30A不可恢复无延迟的cartridge fuse,在连到1000A的电流源上，短路测试端子。5 ?# S4 t; B2 `( I- _8 ^" @
（2）调光器安装方式：安装到metal flush-device box里，表面用metal flush-device cover plate覆盖。外壳和任何暴露的金属部件通过15A不可恢复无延迟的cartridge fuse连接到地。
" f/ Z# t% H4 `* \ r+ `& P; j3 f. P5 ?! b+ I
如果是按照我上面这样理解的，那连通了1000A的电流源后，串联的30A保线丝不是一下就断了吗？还使用1000A的电流源做什么用？？？而且这个1000A的电流源也太大了吧。; I3 C2 k. t, F5 T+ \2 l% b
还有metal flush-device box和metal flush-device cover plate.究竟是什么东西？？？- P' Y) N/ m" H o& |9 n% y
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？注册安规
x
|
/2 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2013-5-22 11:41
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2013-5-22 12:18
楼主