2009年会员禁言处理清单

fasten · 发表于 2009-4-16 15:41

会员信息：  estayang
禁言原因：  广告
违规链接：  http://www.angui.org/bbs/read.php?tid-45158.html
                     http://www.angui.org/bbs/read.php?tid-44744.html
处理方法：  永久禁言

fasten · 发表于 2009-4-18 17:28

会员信息：  leoshen
禁言原因：  恶意灌水
违规链接：  http://www.angui.org/bbs/read.php?tid-45348.html
处理方法：  禁言10天

fasten · 发表于 2009-4-20 08:21

会员信息：  hezhi03052
禁言原因：  上传安规网已有的标准赚积分
违规链接：  http://www.angui.org/bbs/read.php?tid-45442.html
处理方法：  禁言5天

附件： ANGUI-ORG-GB 50311-2007 综合布线系统工程设计规范.pdf (994 K) 下载次数:1 [删除]

嘻嘻 · 发表于 2009-4-20 16:17

会员信息： gxllcs
禁言原因：广告
违规链接： http://www.angui.org/bbs/read.php?tid-45329-keyword-.html
处理方法：禁言5天

caballo3157 · 发表于 2009-4-21 05:48

会员信息： gcg111
禁言原因：广告
违规链接： http://www.angui.org/bbs/read.php?tid-45401.html
处理方法：禁言10天

嘻嘻 · 发表于 2009-5-5 23:23

会员信息：  sunny.yang
禁言原因：  广告
违规链接：  http://www.angui.org/bbs/read.php?tid-46840-keyword-.html
处理方法：  禁言5天

fasten · 发表于 2009-5-6 12:53

会员信息：  yangjian
禁言原因：  广告
违规链接：  http://www.angui.org/bbs/search.php?authorid-57493.html
处理方法：  永久禁言，封IP

fasten · 发表于 2009-5-15 16:57

会员信息：  fuqinliu
禁言原因：  疯狂灌水，复制词汇表
违规链接：  http://www.angui.org/bbs/read.ph ... toread--page-9.html
处理方法：  禁言10天，清空12点威望

去氢 dehydrogenation去氢热处理 heat treatment for dehydrogenation脱硫 desulphurization脱磷 dephosphorization渗合金 alloying微量合金化 microalloying3 物理冶金一次结晶组织 primary solidification structure二次结晶组织 secondary solidification structure联生结晶 epitaxial solidification焊缝结晶形态 solidification mode in weld-bead结晶层状线 ripple多边化边界 polygonization boundary结晶平均线速度 mean solidification rate针状铁素体 acicular ferrite条状铁素体 lath ferrite5. 焊接性焊接性weldability使用焊接性 service weldability工艺焊接性 fabrication weldability冶金焊接性 metallurgical weldability热焊接性 thermal weldability母材 base metal; parent metal焊接区 weld zone焊态 as-welded (AW)母材熔化区 fusion zone半熔化区 partial melting region未混合区 unmixed zone熔合区 bond area熔合线 weld junction (英)；bond line (美)热影响区 heat-affected zone (HAZ)过热区 overheated zone粗晶区 coarse grained region细晶区 fine grained region过渡区 transition zone硬化区 hardened zone碳当量 carbon equivalent铬当量 chromium equivalent镍当量 nickel equivalent舍夫勒组织图 Schaeffler’s diagram德龙组织图 Delong’s diagram连续冷却转变图（CCT图）continuous cooling transformation裂纹敏感性 cracking sensibility焊接裂纹 weld crack焊缝裂纹 weld metal crack焊道裂纹 bead crack弧坑裂纹crater crack热影响区裂纹 heat-affected zone crack纵向裂纹 longitudinal crack
横向裂纹 transverse crack微裂纹 micro-crack; micro-fissure热裂纹 hot crack凝固裂纹 solidification crack晶间裂纹 intercrystalline crack穿晶裂纹 transcrystalline crack多边化裂纹 polygonization crack液化裂纹 liquation crack失延裂纹 ductility-dip crack冷裂纹 cold crack延迟裂纹 delayed crack氢致裂纹 hydrogen-induced crack焊道下裂纹 underbead crack焊根裂纹 root crack焊趾裂纹 toe crack锯齿形裂纹 chevron cracking消除应力处理裂纹 stress relief annealing crack (SR crack)再热裂纹 reheat crack焊缝晶间腐蚀 weld intercryctalline corrosion刀状腐蚀 knife line attack敏化区腐蚀 weld decay层状撕裂 lamellar tearing6 焊接性试验 weldability裂纹试验 cracking testIIW裂纹试验 IIW cracking testY形坡口裂纹试验 slit type cracking test分块形槽热裂纹试验 segmented circular groove cracking testH形裂纹试验 H-type cracking test鱼骨形裂纹试验 fishbone cracking test指形裂纹试验 finger (cracking) testT形裂纹试验 Tee type cracking test环形槽裂纹试验 circular-groove cracking test可调拘束裂纹试验 varestraint testBWRA奥氏体钢裂纹试验 BWRA cracking test for austenitie steel 圆棒裂纹试验 bar type cracking test; round bar cracking test里海裂纹试验 Lehigh restraint cracking test圆形镶块裂纹试验 circular-path cracking test十字接头裂纹试验 cruciform cracking testZ向窗口拘束裂纹试验 Z-direction window type restraint cracking testG-BOP焊缝金属裂纹试验 G-BOP weld metal crack test巴特尔焊道下裂纹试验 Battelle type underbead cracking testU形拉伸试验 U-tension test缪雷克期热裂纹试验 Murex hot cracking test菲斯柯裂纹试验 FISCO (type) cracking testCTS裂纹试验 controlled thermal severity拉伸拘束裂纹试验（TRC试验）tensile restraint cracking test刚性拘束裂纹试验（RRC试验）rigid restraint cracking test插销试验 implant testTigamajig 薄板焊接裂纹试验 Tigamajing thin plate cracking test焊道纵向弯曲试验 longitudinal-bead test柯麦雷尔弯曲试验 Kommerell bead bend test肯泽尔弯曲试验 Kinzel test缺口弯曲试验 notch bend test热朔性试验 hot-ductility test热影响区冲击试验 impact test of HAZ热影响区模拟试验 synthetic heat-affected zone test最高硬度试验 maximum hardness test落锤试验 NRL (Naval Research Laboratory)测氢试验 Hydrogen test焊接材料电极焊接材料welding consumables电极electrode熔化电极consumable electrode不熔化电极nonconsumable electrode钨电极tungsten electrode焊丝welding wire. Welding rod实心焊丝solid wire渡铜焊丝copper-plating welding wire自保护焊丝self-shielded welding wire药芯焊丝flux-cored wire复合焊丝combined wire堆焊焊丝surfacing welding rod填充焊丝filler wire焊条electrode/ covered electrode焊芯core wire药皮coating (of an electrode)/ covering (of an electrode)涂料coating flux/coating material造气剂gas forming constituents造渣剂slag forming constituents合金剂alloying constituent脱氧剂dioxidizer稳弧剂arc stabilizer粘接剂binder水玻璃water glass 水玻璃模数modules of water glass酸性焊条acid electrode高钛型焊条high titania (type) electrode钛钙型焊条lime titania type electrode钛铁矿形焊条ilmenite type electrode氧化铁型焊条iron oxide type electrode/ high iron oxide type electrode高纤维素型焊条high cellulose (type) electrode石墨型焊条graphite type electrode碱性焊条basic electrode/ lime type covered electrode低氢型焊条low hydrogen type electrode高韧性超低氢焊条high toughness super low hydrogen electrode奥氏体焊条austenitic electrode铁素体焊条ferritic electrode
不锈钢焊条stainless steel electrode珠光体耐热钢焊条pearlitic heat resistant steel electrode低温钢焊条low temperature steel electrode/ steel electrode for low temperature铝合金焊条aluminum alloy arc welding electrode铜合金焊条copper-alloy arc welding electrode铜芯铸铁焊条cast iron electrode with steel core 纯镍铸铁焊条pure nickel cast iron electrode球墨铸铁焊条electrode for welding spheroidal graphite cast iron铸芯焊条electrode with cast core wire镍基合金焊条nickel base alloy covered electrode蒙乃尔焊条Monel electrode纯铁焊条pure iron electrode渗铝钢焊条alumetized steel electrode高效率焊条high efficiency electrode铁粉焊条iron powder electrode底层焊条backing welding electrode深熔焊条deep penetration electrode重力焊条gravity electrode立向下焊条electrode for vertical down position welding节能焊条saving energy electrode水下焊条underwater welding electrode耐海水腐蚀焊条seawater corrosion resistant steel electrode低尘低毒焊条low-fume and harmfulless electrode/ low-fume and low-toxic electrode堆焊焊条surfacing electrode耐磨堆焊焊条hardfacing electrode钴基合金堆焊焊条cobalt base alloy surfacing electrode碳化钨堆焊焊条tungsten carbide surfacing electrode高锰钢堆焊焊条high manganese steel surfacing electrode双芯焊条twin electrode绞合焊条stranded electrode编织焊条braided electrode双层药皮焊条double coated electrode管状焊条flux-cored electrode气渣联合保护型药皮semi-volatile covering焊条工艺性usability of the electrode/ technicality of the electrode焊条使用性running characteristics of an electrode/ operating characteristics of an electrode焊条熔化性melting characteristics of an electrode焊条直径core diameter焊条偏心度eccentricity (of an electrode)药皮重量系数gravity coefficient of coating焊条药皮含水量percentage of moisture for covering焊条夹吃持端bare terminal (of an electrode)焊条引弧端striking end (of an elcetrode)焊剂welding flux/ flux熔炼焊剂fused flux粘结焊剂bonded flux烧结焊剂sintered flux/ agglomerated flux窄间隙埋弧焊焊剂flux for narrow-gap submerged arc welding低氢型焊剂low hydrogen type flux高速焊剂high speed welding flux无氧焊剂oxygen-free flux低毒焊剂low poison flux磁性焊剂magnetic flux熔接电弧焊 arc welding直流电弧焊 direct current arc welding交流电弧焊 alternating current arc welding三相电弧焊 three phase arc welding熔化电弧焊 arc welding with consumable金属极电弧焊 metal arc welding不熔化极电弧焊 arc welding with nonconsumable碳弧焊 carbon arc welding明弧焊 open arc welding焊条电弧焊 shielded metal arc welding (SMAW)
重力焊gravity welding躺焊 fire cracker welding电弧堆焊 arc surfacing自动堆焊 automatic surfacing躺板极堆焊 surfacing by fire cracker welding带极堆焊 surfacing with band-electrode振动电弧堆焊 vibratory arc surfacing耐磨堆焊 hardfacing埋弧焊 submerged arc welding (SAW)多丝埋弧焊multiple wire submerged arc welding纵列多丝埋弧焊 Tandem sequence (submerged-arc welding)横列多丝埋弧焊 series submerged arc welding (SAW-S)横列双丝并联埋弧焊 transverse submerged arc welding热丝埋弧焊 hot wire submerged-arc welding窄间隙埋弧焊 narrow-gap submerged arc welding弧压反馈电弧焊 arc voltage feedback controlling arc welding自调节电弧焊 self-adjusting arc welding适应控制焊接 adaptive control welding焊剂层 burden; flux layer气体保护电弧焊 gas shielded arc welding保护气体 protective atmosphere惰性气体 inert-gas活性气体 active-gas惰性气体保护焊 inert-gas (arc) welding氩弧焊 argon arc welding熔化极惰性气体保护电弧焊 metal inert-gas arc welding钨极惰性气体保护电弧焊 tungsten inert-gas arc welding钨极氢弧焊 argon tungsten arc welding脉冲氢弧焊 pulsed argon arc welding熔化极脉冲氢弧焊 argon metal pulsed arc welding钨极脉冲氢弧焊 argon tungsten pulsed arc welding热丝MIG焊 hot wire MIG welding热丝TIG焊 hot wire TIG welding氨弧焊 helium-arc welding活性气体保护电弧焊 metal active-gas arc welding混合气体保护电弧焊 mixed gas arc welding二氧化碳气体保护电弧焊 carbon-dioxide arc welding; CO2 arc welding 细丝CO2焊 CO2 arc welding with thin wire粗丝CO2焊 CO2 arc welding with thick wire磁性焊剂CO2焊 unionarc welding药芯焊丝CO2焊 arcos arc process; dual shield arc welding气电立焊 electrogas (arc) welding氮弧焊 nitrogen-arc welding水蒸气保护电弧焊 water vapour arc welding原子氢焊 atomic hydrogen welding冲器室中电弧焊 controlled atmosphere arc welding旋转电弧焊 rotating arc welding短路过渡电弧焊 short circuiting arc welding焊丝横摆频率 weaving speed of wire焊丝停摆时间 electrode keep time of slider4．等离子弧焊 plasma arc welding (PAW)等离子弧 plasma arc等离子流 plasma jet转移弧 transferred arc非转移弧 nontransferred arc联合型等离子弧 combined plasma arc主弧 main arc维弧 pilot arc维弧电流 pilot arc surrent双弧现象 double arcing双弧临界电流 critical current of double arcing等离子弧焊枪 plasma (welding) torch压缩喷嘴 constricting nozzle单孔喷嘴 single port nozzle多孔喷嘴 multiport nozzle压缩喷嘴孔径 orifice diameter
孔道长度 orifice throat length孔道比 orifice throat ratio等离子气 plasma gas; orifice gas电极内缩长度 electrode setback小孔效应 keyhole effect小孔型等离子弧焊 keyhole-mode welding熔透型等离子弧焊 fusion type plasma arc welding大电流等离子弧焊 high-current plasma arc welding中电流等离子弧焊 intermediate-current plasma arc welding 小电流等离子弧焊 low-current plasma arc welding微束等离子弧焊 micro-plasma arc welding交流等离子弧焊 AC plasma arc welding 脉冲等离子弧焊 pulsed plasma arc welding等离子弧堆焊plasma arc surfacing热丝等离子弧堆焊 hot wire plasma arc surfacing粉末等离子弧堆焊 plasma arc powder surfacing等离子-熔化极惰性气体保护电弧焊 plasma MIG welding转移弧电源 transferred arc power supply 非转移弧电源 nontransferred arc power supply 5．电弧焊设备 arc welding equipment电弧焊机 arc welding machine直流弧焊机 DC arc welding machine交流弧焊机 AC arc welding machine交直流两用弧焊机 AC/DC arc welding machine单站弧焊机 single operator arc welding machine多站弧焊机 multi-operator arc welding set固定式弧焊机 stationary arc welding machine移动式弧焊机 portable arc welding machine台式弧焊机 bench arc welding machine内燃机驱动式弧焊机 combustion engine driven arc welding set电动机驱动式弧焊机 motor driven arc welding set熔化极弧焊机 arc welding machine using a consumable electrode不熔化极弧焊机 arc welding machine using a non-consumable electrode脉冲弧焊机 pulsed arc welding machine气体保护弧焊机 gas shielded arc welding machine氩弧焊机 argon arc welding machine二氧化碳弧焊机 CO2 arc welding machine钨极惰性气体保护弧焊机 tungsten inert-gas welding machine熔化仍惰性气体保护弧焊机 metal inert-gas welding machine气电立焊机 electrogas (arc) welding machine等离子弧焊机 plasma arc welding machine微束等离子弧焊机 micro-plasma welding equipment原子氢焊机 atomic hydrogen welding apparatus埋弧焊机 submerged arc welding machine弧焊电源 arc welding power source直流弧焊电源 DC arc welding power source交流弧焊电源 AC arc welding power source交直流两用弧焊电源 AC/DC arc welding power source脉冲弧焊电源 pulsed arc welding power source上升特性弧焊电源 rising characteristic arc welding power source平特性弧焊电源 constant –voltage arc welding power source 下降特性弧焊电源 dropping characteristic arc welding power source垂降特性弧焊电源 constant-current arc welding power source多特性弧焊电源 slope-controlled arc welding power source逆变式焊接电源 inverter welding power source晶体管弧焊电源 transistor arc welding power source电源动特性 dynamic characteristic电源外特性 external characteristic弧焊变压器 arc welding transformer弧焊整流器 arc welding rectifier硅弧焊整流器 silicon arc welding rectifier晶闸管弧焊整流器 SCR arc welding rectifier; arc welding silicon controlled rectifier脉冲弧焊整流器 pulsed arc welding rectifier弧焊发电机 arc welding generator焊车 welding tractor焊接机头 welding head
行走机构 traveller送丝机构 wire feeder等速送丝方式 constant wire-feed system变速送丝方式 alternate wire-feed system跟踪装置tracer焊丝盘 wire reel焊钳 electrode holder焊枪 welding gun 电极夹 electrode holder导电嘴 tip; contact tube喷嘴 nozzle焊剂漏斗 flux-hopper高频振荡器 oscillator; HF unit脉冲引弧器 pulsed arc starter; surge injector脉冲稳弧器 pulsed arc stabilizer脉冲激弧器 pulsed arc exciter输出电抗器 out put reactor镇定变阻器 ballast rheostat直流分量抑制器 direct current suppressor焊接回路 welding circuit额定焊接电流 rated welding current焊接电流调节范围 range of welding current regulation空载电压 open circuit voltage(no load voltage)约定负载电压 conventional load voltage负载持续率 duty cycle额定负载持续率 rated duty cycle; standard service手工弧焊机 manual arc welding machine6．电焊渣 electroslag welding (ESW)手工电渣焊 manual electroslag welding丝极电渣焊 electroslag welding with wire electrode板极电渣焊 electroslag welding with plate electrode熔嘴电渣焊 electroslag welding with consumable nozzle管极电渣焊 electroslag welding with tube electrode窄间隙电渣焊 narrow-gap electroslag welding电渣堆焊 electroslag surfacing电渣焊机 electrosalg welding machine熔嘴 consumable nozzle; consumable wire 钢档板 steel shoe (192页)钢冷却板 Cu-cooling plate铜滑板copper shoe渣池slag bath渣池深度depth of slag bath渣池电压voltage of slag bath电渣过程稳定性electroslag process stability焊丝间距distance between welding wires7．电子束焊、激光束电子束焊electron beam welding (EBW)脉冲电子束焊pulsed electron beam welding加速电压acceleration voltage/ operating voltage电子束电流beam current电子束功率beam power电子束功率密度beam power density焦点focal spot焦距focal length工作距离work distance电子束焊机electron beam welding machine高真空电子束焊机full vacuum electron beam welder低真空电子束焊机partial vacuum electron beam welder非真空电子束焊机nonvacuum electron beam welder真空度vacuum电子枪electron gun二极电子枪diode gun三极电子枪triode gun偏压电极bias electrode电磁透镜electromagnetic lens电子束偏转线圈electron beam deflection coils
导流系数perveance钉尖spiking激光焊laser welding/ laser beam welding连续激光焊continuous laser welding脉冲激光焊impulsed laser welding激光焊机laser welding equipment气体激光器gas laser固体激光器solid laser焦斑直径focussed diameter of the beam离焦量clearance between focal point and (plate) surface焊缝深宽比weld seam depth-to-width ratio8．气焊气焊gas welding氧乙炔焊 oxy-acetylene welding氢氧焊 oxy-hydrogen welding空气乙炔焊 air-acetylene welding氧乙炔焊 oxy-acetylene flame氢氧焰 oxy-hydrogen flame氧煤气焰 oxy-coal gas flame焊接火焰 welding flame混合比 mixing ratio混合气体可燃范围 inflammable limit of the gaseous一次燃烧 primary combustion二次燃烧 secondary combustion燃烧速度 combustion rate燃烧强度 combustion intensity火焰热效率 flame heating efficiency焰芯 inner cone; flame cone内焰 internal flame外焰 flame envelope中性焰 neutral flame氧化焰 oxidizing flame碳化焰 carburizing flame还原区 reducing zone火焰稳定性 flame stability回火 flashback逆火 backfire回烧 flashback气体发生速度 gasification speed焊炬 torch; blow pipe等压式焊炬 balanced pressure torch射吸式焊炬 injector torch氧乙炔焊炬 oxy-acetylene torch焊割两用炬 combined cutting and welding torch混合室 mixing chamber喷射器 injector焊嘴 welding nozzle; welding tip液氧气化器 oxygen evaporator气瓶 gas cylinder乙炔瓶 acetylene cylinder阀罩 cylinder cap气瓶阀 cylinder valve汇流排 cylinder manifold减压器 pressure regulator; gas regulator单级减压器 single stage regulator两级减压器 two stage regulator回火防止器 flashback arrestor干式回火防止器 dry flashback arrestor水封式回火防止器 water-closing type arrestor净化器 purifier乙炔发生器 acetylene generator低压乙炔发生器 low pressure acetylene generator中压乙炔发生器电石入水式乙炔发生器接触式乙炔发生器水电石式乙炔发生器
移动式乙炔发生器固定式乙炔发生器溶解乙炔气焊溶剂9 热剂焊、水下焊热剂焊 thermit welding (TW)热剂补焊 thermit repair welding钢轨热剂焊 thermit rail welding热剂 thermit powder热剂钢水 thermit steel热剂反应 thermit reaction热剂溶渣 thermit slag热剂铸模 thermit mold; mold for thermit weld热剂坩埚 thermit crucible焊筋 collar水下焊 underwater welding水下气体保护电弧焊 underwater gas shielded arc welding水下等离子弧焊 underwater plasma arc welding温式水下焊wet method underwater welding干式水下焊 dry method underwater welding局部干式水下焊 local dry underwater welding水帘局部干式水下焊 water curtain type dry underwater welding遥控水下焊 remote controlled underwater welding电弧空腔 arc bubble五压焊电阻焊 resistance welding (RW)点焊 spot welding; resistance spot welding凸焊 projection welding缝焊 seam welding滚点焊 roll-spot welding连续点焊 stitch welding多点焊 multiple spot welding手压点焊 push welding; poke welding脉冲点焊 pulsation spot welding; multiple-impulse welding双面点焊 direct spot welding单面点焊 indirect spot welding串联点焊 series spot welding多点凸焊multiple projection welding频道进缝焊 step-by-step seam welding压平缝焊 mash seam welding串联缝焊 series seam welding对接缝焊 butt seam welding; foil-butt seam电阻对焊 upset butt welding闪光对焊 flash butt welding (FBW)储能焊 stored energy welding电容储能点焊 condenser discharge spot welding高频电阻焊 high frequency resistance welding冲击电阻焊 percussion welding胶接点焊 spot weld-bonding; weld-bonding闪光 flashing; flash过梁 bridge; lintel顶锻 upsetting; upset夹紧力 clamping force顶锻力 upsetting force; upset force电极压力 electrode force; electrode pressure电极滑移 electrode skid焊接循环 welding cycle预压时间 squeeze time锻压时间 forge-delay time; forge time焊接通电时间（电阻焊）welding time (resistance welding)预热时间 preheat time加热时间 heat time冷却时间 cool time间歇时间 quench time; chill time回火时间 temper time维持时间 hold time
休止时间 off time闪光时间flash time; flashing time顶锻时间 upset time; upsetting time有电顶锻时间 upset current time无电顶锻时间 upset current-off time闪光速度 flashing speed闪光电流 flashing current; flash current顶锻电流 upset current预热电流 preheat current回火电流 temper current调伸长度 initial overhange; extension总留量 total allowance闪光留量 flash allowance顶锻留量 upset allowance顶锻速度 upset speed 电极接触面 electrode contact surface贴合面 faying surface焊点 welding spot熔核 nugget熔核直径 diameter of nugget塑性金属环区corona bond焊透率penetration rate压痕indentation压痕深度depth of indentation压深率indentation ratio

李云峰 · 发表于 2009-5-21 17:30

会员信息： wwb0104
禁言原因：技术区连续灌水、留联系方式
违规链接： http://www.angui.org/bbs/read.ph ... toread--page-2.html
30、31、32楼
处理方法：禁言10天

fasten · 发表于 2009-5-26 10:53

会员信息： dolly2009
禁言原因：广告
违规链接： http://www.angui.org/bbs/read.php?tid-48797.html
处理方法：禁言10天

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[安规监狱] 2009年会员禁言处理清单

安规网为您推荐 /2