|
根据EN60335-1中标准的原话:
- {, h8 Q% z7 Q9 C1 }8 a# L9 A: t19.11.4 Appliances having a switch with an off position obtained by electronic7 ~4 m! V9 m: \. {+ K8 ?
disconnection, or a switch that can be placed in the stand-by mode, are subjected to the tests [3 l2 c9 L4 Y# P( [' e) y2 M( q
of 19.11.4.1 to 19.11.4.7. The tests are carried out with the appliance supplied at rated! m( Q6 t6 m; R1 B9 _
voltage, the switch being set in the off position or in the stand-by mode.7 y5 C: o6 i4 F
Appliances incorporating a protective electronic circuit are subjected to the tests of
# T, r6 e, v/ j& r1 b6 f+ x; c19.11.4.1 to 19.11.4.7. The tests are carried out after the protective electronic circuit has
# v% r7 G' C4 N V n& Boperated during the relevant tests of Clause 19 except 19.2, 19.6 and 19.11.3. However,. C( s5 l+ w6 n( N# _
appliances that are operated for 30 s or 5 min during the test of 19.7 are not subjected to the
4 S# ~$ P5 ^. o( K& c9 J8 ntests for electromagnetic phenomena.
* ]; O6 }4 }! |! UThe tests are carried out with surge arresters disconnected, unless they incorporate spark gaps.
" {6 d, P x3 {$ R4 M0 [NOTE 1 If the appliance has several modes of operation, the tests are carried out with the appliance operating in each mode, if necessary.' X# M( b4 }# d3 x" Z
NOTE 2 Appliances incorporating electronic controls complying with the IEC 60730 series are not exempt from the tests.
" x3 w s' T1 x. w3 \* G7 }4 g' w# P! p+ h# E8 f) {3 q
而19.11.4.1 到 19.11.4.7.分别是做IEC61000的测试,其中就有-4-2和-4-5的雷击测试。是针对所有待机类产品的附加测试,测试的时候需要拆除压敏电阻,除非与之有相关联的放电管。 |
|