|
1st (twice)7 I* T; T/ M+ I" c; m
Detachable parts are removed.
) d: B/ {3 Z Q3 I) m! OThe liquid container of the appliance is completely filled with water containing approximately 1 % NaCl and a further quantity, equal to 15 % of the capacity of the container or 0,25 l, whichever is the greater, is poured in steadily over a period of 1 min.
+ C0 w1 Y& \4 E6 \- ?In case of doubt, the spillage test is carried out with the appliance deviating from the normal position of use by an angle not exceeding 5°.
' O) m6 |2 E& C7 x! Z) A8 |2 P4 \1 u) [
0 y) k4 U8 [* y/ N$ m( F' RFor cordless kettles, the test with the kettle on the horizontal plane is carried out with the kettle both on and off its stand.% _# z6 \# @+ z/ C1 @
2 X; c5 t2 D4 ^5 ?5 W% I0 P, Y
9 t+ `& y0 Q; I4 _ ~ k# J% \2nd -- Kettles that can be filled through the spout
" v& X* U, b& q2 s* Y1 CDetachable parts are removed.
: e# y' l z8 L9 D! P' `7 eTested on a plane inclined at an angle of 20° to the horizontal, with the spout uppermost.
3 `4 Z _1 Z* v! Afilled with water containing approximately 1 % NaCl to the maximum level, if this indication is visible from the filling position, otherwise until water spills from the kettle.
# U+ a9 H# P* \8 Q. _$ iA further quantity, equal to 15 % of the rated capacity of the kettle, is then added as quickly as possible3 ?) j: B5 e! e. e4 f! H
Only with the cordless kettle off its stand
- f# [" Q; H) ^7 f$ m i$ l. j7 F' r$ v' }8 Q( I3 i- D
* j) l1 e: A, b! I6 M% k. v+ f/ v+ d, W! I
3rd
) q& t" v1 G! i. x* qKettles are then filled to rated capacity with water. 5 X1 C8 h- g0 [6 m) z! O
They are placed on a plane inclined at an angle of 20° to the horizontal with their spout facing up the slope of the inclined plane.
# ]9 l5 }5 R7 W& g0 L1 ]% DWater shall not be discharged from the kettle
0 X: b/ k4 d8 p0 q! o/ q4 x% e7 a( U& C* n5 {
! ?: ~# d! L% e o- z3 W& Q! ^. s ]% [* O" s
4th -- Stands for cordless kettles0 `4 J0 r `1 v) s
The stand is placed on a horizontal surface
$ H1 ^# X/ N( b/ S# m$ v* g6 K 30 ml of water containing approximately 1 % NaCl is poured onto the connecting device. 3 W& z3 z# Z# m; P ?
The solution is poured steadily through a tube having an inner diameter of 8 mm over a period of 2 s, the lower end of the tube being 200 mm above the connecting device.
# X/ w4 n% n( _7 e* K' [; Z7 \$ J( dJudgment:The stand shall then withstand the electric strength test of 16.3, the test voltage for reinforced insulation being 2 500 V. |
|