关于EMC整改

lewis.zhang · 发表于 2010-11-15 07:55

关于产品EMC整改的一些问题请教各位：
我们一款产品EMC测试出现以下问题整改一直不过，

1，产品金属外壳，有一块塑料面板上有一液晶显示屏，显示工作电压之类，静电抗扰度空气放电8KV时显示屏会花。不能自动恢复，只有重新开机才可以恢复。有什么办法？

2，传导整改后曲线很好，很低，但就是在150KHz处有一个尖峰超过限值。请问是什么原因？有什么整改方案？

3，辐射整改不过，没有余量。

谢谢！

kamleung · 发表于 2010-11-15 13:08

May I know where the air discharge is applicable when the ED problem occured,
- near the edge of your plastic cover, or
- at the centre of your plastic cover?

lewis.zhang · 发表于 2010-11-15 14:33

near the edge of the LCD screen.

kamleung · 发表于 2010-11-16 13:03

As your product is made with metal case, the electrical charges will jump onto the metal case when the ESD gun is closed to the edge of LCD screeen. Then, the elctrical charges are brought to the system ground through the metal case. That means the pins of LCD display should be shielded by the metal case and therefore the controller IC will not be affected by the ESD charges. Any way, may I know whether your metal case is grounded or not?

lewis.zhang · 发表于 2010-11-16 14:13

The metal case is grounded, and the LCD display screwed on the plastic panel.

lewis.zhang · 发表于 2010-11-16 14:25

引用第4楼lewis.zhang于2010-11-16 14:13发表的 :4 ~ P. j+ T0 U9 d- V' \% j
The metal case is grounded, and the LCD display screwed on the plastic panel.

kamleung · 发表于 2010-11-16 17:00

To make further suggestions, just to confirm the arrangement again with the two pictures. If any of my undertandings are wrong, please feel free to correct me.

bob_dai · 发表于 2010-11-16 21:03

楼上的蛮专业

lewis.zhang · 发表于 2010-11-16 21:46

The LCD display and the black panel are plastic, no metal used in the two pictures.

kamleung · 发表于 2010-11-17 13:30

As the black panel is plastic, it cannot help to protect the LCD display. The electrical charge may creep towards the pins of LCD when the 8kV ESD gun is applied. Two suggestions are made in the above two pictures. Hopefully, it may help.

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

关于EMC整改

本帖子中包含更多资源

本帖子中包含更多资源

本帖子中包含更多资源

安规网为您推荐 /2